Shingeki no Kyojin Season 2 (Attack on Titan Season 2) | 1080p | BDRip | Dual Audio | Enhanced | x265 | Fast & Furious 7 (2015) | Télécharger Part 3

Pen Manual 5 2009

All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
 33 views
of 5

Please download to get full document.

View again

Description
Video Recorder Manual (Ball-point pen Type) Remark: This picture only for reference 1. Structure 1: Camera 2: Microphone 3: Operation button 4: Status Indicator 5: Reset 6: USB interface 2. Introduction This ball-point pen is a high-definition video recorder with built-in memory. With simple operation, elegant design, small size, it is easy to carry. It is an essential utility in business, education, security, media, justice, tourism, health care, living and other field. 3. Operating a.
Share
Tags
Transcript
    Video Recorder Manual (Ball-point pen Type) Remark: This picture only for reference  1. Structure 1: Camera 2: Microphone 3: Operation button4: Status Indicator 5: Reset 6: USB interface 2. Introduction   This ball-point pen is a high-definition video recorder with built-in memory. With simpleoperation, elegant design, small size, it is easy to carry. It is an essential utility in business,education, security, media, justice, tourism, health care, living and other field. 3. Operating  a. Parts Description : a.1 Microphone and camera: Camera(1) is used to get the image signal;Microphone (2) is used to get the sound signal. a.2 Button(3): Press the button for the power, start recording, stop recording. a.3 Indicator(4): blue light is the data transfer status indicator; red light is the videorecording status indicator. a.4 Reset(5): If the video recorder stops responding,   please use the suitablenon-metallic tool to push the reset button. a.4 Socket(6): The stand USB socket is used to connect with computer or charger.It is the interface for data transfer and charging. b.   ON/OFF : Press button (3) for 2 seconds to start the device. It gets into the videorecording mode. Meanwhile the red video indicator is on. When the indicator light ison, press the button for 3 seconds. The red and blue lights are on at the same time,the device will automatically save the current video file and shutdown. c.   Record video : In the video mode, the device enters into the standby status for videorecording. Now the red light is on. Press the button (3) for short time to start thevideo recording. The red light flashes slowly. When the red indicator light flashes,press the button for short time to stop recording and save the file. Afterward the redlight returns to ON mode; In order to ensure the safety and the size of the file, thesystem will automatically save file every 50 minutes once, and continue the videorecording. Note: Make sure there is adequate light in the surrounding and the camera is notblocked by other items. Keep the camera upright and stable. And the object shouldbe more than 50cm from the camera. In order to ensure good sound effect ofrecording, do not block the microphone hole. d. Connect the computer : In standby or OFF mode, you can connect the device withthe computer. The computer will pop up a removable disk logo. There is an imagefile directory for: * Disk \ _REC \ 100MEDIA. During video recorder and computertransfer data, the blue light flashes rapidly. For the disconnection, please click‘SAFELY REMOVE HARDWARE’ on the right bottom corner of the task bar. Thenclick to stop the ‘USB mass storage device’. Unplug the USB. The disconnectioncompletes. Note: According to the computer or system configuration, there will be slightdifference for the time of identifying removable disk. Please be patient. During thisperiod, please do not press the button to avoid the bad impact of computer hardware.If the computer does not identify the removable disk long time, disconnect andreconnect the device. If the computer is unable to identify the hardware yet, makesure your operating system, driver and USB cable are all in normal condition. Please  make sure to disconnect the device in accordance with the normal process to avoidthe possible damage for computer and recorder. e.   Charge : Connect to computer USB interface or charger. During the charging, thered light flashes slowly. When the battery is fully recharged, the red light stopsflashing. Note: The recorder is with built-in high-capacity lithium polymer battery. The batteryis with no memory effect. It can be used and charged at anytime. But for the initialfive times of charging, please charge battery to saturation after the battery runs out.It is to activate the battery maximum capacity and maintain the standard workingtime. f. Set Time : The video recorder provides the function to display the video recordingtime in video file. The format is as following: Year – month - Day: minutes: seconds.Time setting process is as following: f.1 . Create a new file in .TXT format. Input the time in accordance with thefollowing format 2008.07.15 16.10.28. The time is the current time at your location.Please double-check the text format in order to ensure the correct format.. f.2. Rename the new text file as time.txt . f.3. Connect the video recorder to the computer; wait until the computer appears a‘REMOVABLE DISK’. Copy the “time.txt file to this storage device root directory. f.4 . Disconnect this storage device. Restart the video recorder to complete the timesetting. f.5 . The set time will be saved to the video recorder. g. Troubleshooting :When the storage space is insufficient, the blue light and red light flashes alternatelyabout 5 seconds, then automatically save the current files and shut down. If youwant to continue to use this video recorder, copy the necessary files to computerand delete the old documents in storage in order to free up enough storage space;When the battery is insufficient, the blue and red light flash alternately about 5seconds, then automatically save the current files and shut down. If you want tocontinue to use the recorder, please charge the battery.If the video recorder stops responding due to improper operation or otherunexpected reason, please use the suitable non-metallic tool to push the resetbutton. 4. Parameters Item Parameters Video format AVIVideo encoding M-JPEGVideo resolution 640*480 VGAVideo frame rate 30fps
Related Search
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks